For the Auditorium dei Teatini in Piacenza LITEC has supplied structures made up of FX30S, QX30S and QD30S trusses.

 

The Auditorium dei Teatini is the result of a masterly restoration work and the use of the most advanced technological solutions. The former St Vincent’s church, located in the very heart of the historical city, has regained the original splendour due to the recovery of the frescoes and the existing wooden artworks – choir, organ case, sedan chairs – and the renovation of the rooms that hosted the sacristy.

 

Technology allowed to convert this building originally thought for worship into a vanguard auditorium, comfortable and well equipped with high-level acoustics. This space has become a permanent rehearsal hall of the Orchestra Giovanile ''Luigi Cherubini'' conducted by the Director Riccardo Muti. Beside this prestigious function, the hall is going to host small theatre shows and chamber music concerts as well as conferences, debates, literary presentations and various meetings.

 

For the development of the Auditorium, LITEC structures were used to support sound and lighting equipment and let roofing sheets slide on special guides. LITEC systems were placed in two areas: the first of 15x15x7.5(h) m dimensions stands frontally close to the altar, and the latter of 16x10x7.5(h) m measures lies at the back of the Auditorium.

 

QD30S trusses were installed at the upper part of the structures in combination with QX30K8 Dado for the creation of corners; FX30S trusses were placed frontally and coupled with FX30K4 Dado for square and flat

section structures; and finally QX30S trusses were used to build up towers.

 

FX30S and QX30S belong to the Standard Series, which stands out for its design, durability and reliability. It is the best-known and most widely-used range of trusses with end plates designed by Litec. Strengthened by a dual connection system of spigots or bolts, the Standard range has become a benchmark for the installations sector. QD30S is a truss of the Heavy Duty family of products, the most solid product line within our General Purpose range. Same dimensions and dual spigot/bolt connection system as the Standard series, but more robust thanks to the use of scaled-up components suitable for demanding usage. The perfect compromise between load capacity and practicality.